Machine Vise with M5 Mount Nuts
Source: Thingiverse by yyh1002
The Machine Vise with M5 Mount Nuts is a free printable 3D model from Thingiverse by yyh1002. ###This is a remix of Yet ANOTHER Machine Vise by TheGoofy, to be used as base for LiftPod. You can download the STL file from the original listing below and print it at home.
About this model
###This is a remix of Yet ANOTHER Machine Vise by TheGoofy, to be used as base for LiftPod. ###Modifications: - 3 slots for M5 nuts on one end. Allows to screw in 3 M5 bolts. - Printed thread changed to 45 degree overhang, easier to print, and longer pitch. - 6.35 Hex hole at the end of knob to drive easily. - Tolerance generally increased from 0.15mm to 0.25mm. - Added a 0.6mm flexible sleeve to increase friction. ###It takes M5x25(or 20) bolt for LiftPod. Same as the clamp bolt. ###Print the sleeves with flexible material. ###No supports required. 0.2mm layer height. 3 wall lines. 35% infill. Increase top/bottom thickness to bases if you require more strength. ###The M5 knob might appears to be ultra large in some slicers because the unit is falsely recognised as cm. If that's the case, …
Frequently asked questions
- Is this 3D model free to download?
- Yes. Machine Vise with M5 Mount Nuts is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by yyh1002.
- Who made this model?
- Designed by yyh1002, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Machine
More from yyh1002
