Spice Rack / Shelf
Source: Thingiverse by i-SOLIDS
The Spice Rack / Shelf is a free printable 3D model from Thingiverse by i-SOLIDS. This is a simple bracket used to create a riser type spice shelf. You can download the STL file from the original listing below and print it at home.
About this model
This is a simple bracket used to create a riser type spice shelf. Some of the other designs I've found had shelves that were too narrow for what I was looking for so I essentially doubled the width by using two pieces of stained 1x2" wood side by side for each shelf - this makes the actual dimensions of each shelf 3" wide. I used a 6ft section of 1x2" and cut it into 4 equal lengths of 18", however, you can adjust the length to fit your need. The same bracket is designed to work for both the right and left sides and a third one could optionally be used to support the middle of long shelves. I chose to print the bracket with white filament and stain the wood with a mahogany look to provide some contrast but you can stain or paint however you want. I also used a durable clear coat spray to p…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Spice Rack / Shelf is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by i-SOLIDS.
- Who made this model?
- Designed by i-SOLIDS, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in kitchen
