DIY Shelf/Shoe rack cupboard furniture
Source: Thingiverse by D1_
The DIY Shelf/Shoe rack cupboard furniture is a free printable 3D model from Thingiverse by D1_. These are plug-in connectors to build a DIY shoe rack or shelf in a honeycomb design with a few wooden boards. You can download the STL file from the original listing below and print it at home.
About this model
These are plug-in connectors to build a DIY shoe rack or shelf in a honeycomb design with a few wooden boards. They are designed to fit to 18mm wooden boards. The clamp distances of the connectors are 17.5mm. Unfortunately my wooden boards were not of good quality and their thicknesses were around 16.5-17.8mm. Keep this in mind and adjust your wooden boards, if necessary. They will hold everything together sturdily -they are thick enough and PLA is strong enough-, but they will not fit as good as intended and there will be some gaps between the boards and the connectors. You are free to choose the length and width of the wooden boards. For example, my wooden boards are 365mm and 190mm long and 300mm wide respectively. The total dimensions of my rack are 780x305x960mm. Of course you can use…
Frequently asked questions
- Is this 3D model free to download?
- Yes. DIY Shelf/Shoe rack cupboard furniture is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by D1_.
- Who made this model?
- Designed by D1_, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in DIY
/https://fbi.cults3d.com/uploaders/14009413/illustration-file/737ad9a7-665f-4b0e-93a2-98099d31d042/PORTADA.png)
