Filament dry box for 3-4 spools of filament
Source: Thingiverse by bummster
The Filament dry box for 3-4 spools of filament is a free printable 3D model from Thingiverse by bummster. My dry box for 3 - 4 spools of filament. You can download the STL file from the original listing below and print it at home.
About this model
My dry box for 3 - 4 spools of filament. There are many dry box plans out there. This one is mine. The rod is at a good height for most spools when using a pair of spool hubs on each spool 1 Sterlite 20qt air tight box. 24 3mmx10mm machine screws (3mm x 8mm will work but I like a little bit of thread sticking out of my nylocks) 24 3mm nylock nuts 24 3mm washers 1ft 3mm OD x 2mm ID PTFE tube. 1 12in 5/16 threaded rod I used 3mm OD x 2mm ID PTFE tube because its what I had on hand. The nut reliefs are too shallow (1mm) on all parts, but they worked for me. The round base of the rod holder and the U shaped 'extrusion' are perpendicular to each other. The Sterlite box has an angle of like 3 degrees or so on all sides. It's not a big deal. Loaded several versions of the U shaped rod holder. m3 …
Frequently asked questions
- Is this 3D model free to download?
- Yes. Filament dry box for 3-4 spools of filament is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by bummster.
- Who made this model?
- Designed by bummster, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Filament
