WD-40 to Schrader Valve Inflator Adapter
Source: MakerWorld by BananaRusher
The WD-40 to Schrader Valve Inflator Adapter is a free printable 3D model from MakerWorld by BananaRusher. DescriptionThis is an adapter that converts from a female Schrader valve into a WD40 compatible adapter if the WD40 can has run out of air but still has solvent. There are 2. You can download the STL file from the original listing below and print it at home.
About this model
DescriptionThis is an adapter that converts from a female Schrader valve into a WD40 compatible adapter if the WD40 can has run out of air but still has solvent. There are 2 versions: One without threads and one with threads. Use the model with threads if your pump/compressor/etc. needs the Schrader Valve to be screwed in. You may need to screw the adapter in/out a few times in the model with threads because of print imperfections for consistent screwing.Print Settings:100% INFILL! (The adapter needs to handle pressure, so there are no air leaks and no bursting)CAUTION! You are handling with pressure, be careful!Insert the adapter as shown in the picture below: (Thinner side - WD-40, Thicker side/Threads side - Schrader Valve) License: Creative Commons Attribution-NonCommercial-ShareAlike…
Frequently asked questions
- Is this 3D model free to download?
- Yes. WD-40 to Schrader Valve Inflator Adapter is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by BananaRusher.
- Who made this model?
- Designed by BananaRusher, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in wd40
Browse related collections
Gear / Paid link The gear we print with Filament, tools, build plates and the hardware behind the models on Thinger, in one shoppable photo on our Amazon storefront. See the gear → Thinger earns a commission from qualifying purchases made through this link, at no extra cost to you.Filament price drops for your next print
We track hundreds of filaments, resins, nozzles and tools on Amazon several times a day. Don't buy before you compare: see today's best prices and the real discount, measured against 30 days of price history.
Creality Hyper ABS Filament 1.75mm, Black & White, 2-Pack, 2KG | Heat…
$26.99
SUNLU TPU Filament 1.75mm,(1kg,Black,95a TPU) | 3D Printer Filament,H…
$20.99
UGUESS TPU 95A 3D Printer Filament, Black, 1KG, TPU 95A Filament 1.75…
$15.99
Thinger earns a commission from qualifying purchases made through these links, at no extra cost to you. The price on Amazon at checkout is the one that counts. Israeli buyers: free shipping over $49 deals in Hebrew (קונים מישראל: הדילים עם משלוח חינם מעל $49, בעברית).
