Is this 3D model free to download?

Yes, 小米智能燈具開關台版轉接座 (台灣 86/118 埋入盒轉陸版開關) is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Where do I download the STL file?

The download is hosted by MakerWorld. Use the "Download from MakerWorld" link on this page to open the original listing and grab the file, or save it to your print queue in the free Thinger app.

Designed by cy0106, published on MakerWorld. Please credit the creator when sharing your print.

Can I print this at home?

Yes. This is a printable 3D model intended for home FDM and resin printers. Check the original listing for suggested print settings.

小米智能燈具開關台版轉接座 (台灣 86/118 埋入盒轉陸版開關) 3D printable model by cy0106

小米智能燈具開關台版轉接座 (台灣 86/118 埋入盒轉陸版開關) photo 1

小米智能燈具開關台版轉接座 (台灣 86/118 埋入盒轉陸版開關) photo 2

小米智能燈具開關台版轉接座 (台灣 86/118 埋入盒轉陸版開關) photo 3

小米智能燈具開關台版轉接座 (台灣 86/118 埋入盒轉陸版開關) photo 4

小米智能燈具開關台版轉接座 (台灣 86/118 埋入盒轉陸版開關) photo 5

小米智能燈具開關台版轉接座 (台灣 86/118 埋入盒轉陸版開關)

Q: Is this 3D model free to download?

Yes, 小米智能燈具開關 台版轉接座 (台灣 86/118 埋入盒轉陸版開關) is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Source: MakerWorld by cy0106

The 小米智能燈具開關台版轉接座 (台灣 86/118 埋入盒轉陸版開關) is a free printable 3D model from MakerWorld by cy0106. 🔌 專為台灣使用者設計的小米智能開關轉接解決方桉許多米粉朋友想在台灣安裝小米的大陸版智慧開關（如小米智能開關、零火版/單火版等），卻常常因為台灣的牆壁埋入盒（暗盒）尺寸與大陸標準（86型）不同而無法順利安裝。這款台版燈開關轉接小米智能燈開關轉接座就是為了解決這個痛點而生的！免去敲牆壁挖孔的麻煩，透過這顆 3D. You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from MakerWorld

30 saves Source: MakerWorld Updated 2026-10-27 Print time: 2h 11m Filament: 52 g License: SDFL · non-commercial Category: Decor & Art

Tags: 小米智能開關, 燈開關轉接座

About this model

🔌 專為台灣使用者設計的小米智能開關轉接解決方桉許多米粉朋友想在台灣安裝小米的大陸版智慧開關（如小米智能開關、零火版/單火版等），卻常常因為台灣的牆壁埋入盒（暗盒）尺寸與大陸標準（86型）不同而無法順利安裝。這款台版燈開關轉接小米智能燈開關轉接座就是為了解決這個痛點而生的！免去敲牆壁挖孔的麻煩，透過這顆 3D 列印轉接座，就能無痛將小米智能開關穩固安裝在台灣的牆面上。✨ 產品特色完美適配：專為台灣常用牆壁開關盒尺寸與小米智能開關孔位設計。美觀整齊：安裝後外觀服貼，不留縫隙，維持居家裝潢美感。堅固耐用：結構強化設計，鎖上螺絲時不易變形或斷裂。📐 建議列印設定 (Printing Settings)建議材質：PLA / PETG（若鎖螺絲較大力，推薦使用韌性較好的 PETG）層高 (Layer Height)：0.2 mm填充率 (Infill)：20% 以上（建議使用格狀或三維蜂巢結構以增加強度）支援材 (Supports)：依模型擺放方向，部分懸空處可能需要支援（建議依實際切片為主）🛠️ 安裝注意事項安全第一：動手安裝前，請務必先關閉總電源開關，避免觸電危險！若對電路不熟悉，建議請專業水電師傅協助安裝。螺絲對齊：先將轉接座鎖上牆壁埋入盒，再將小米開關鎖至轉接座上。喜歡這個實用小工具嗎？歡迎幫我點個讚、上傳你的列印成品照（Boost Me）支持一下創作者！如果有任何尺寸微調的需求或建議，也歡迎在下方留言交流！

Frequently asked questions

Is this 3D model free to download?: Yes. 小米智能燈具開關台版轉接座 (台灣 86/118 埋入盒轉陸版開關) is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
Where is the STL hosted?: The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by cy0106.
Who made this model?: Designed by cy0106, published on MakerWorld. Please credit the creator when sharing your print online.
Can I print this at home?: Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.