Is this 3D model free to download?

Yes, DuoDock 双翼托盘｜北弧 E350ez 笔记本支架 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Where do I download the STL file?

The download is hosted by MakerWorld. Use the "Download from MakerWorld" link on this page to open the original listing and grab the file, or save it to your print queue in the free Thinger app.

Designed by user_1191931874, published on MakerWorld. Please credit the creator when sharing your print.

Can I print this at home?

Yes. This is a printable 3D model intended for home FDM and resin printers. Check the original listing for suggested print settings.

DuoDock 双翼托盘｜北弧 E350ez 笔记本支架 3D printable model by user_1191931874

DuoDock 双翼托盘｜北弧 E350ez 笔记本支架

Source: MakerWorld by user_1191931874

The DuoDock 双翼托盘｜北弧 E350ez 笔记本支架 is a free printable 3D model from MakerWorld by user_1191931874. DuoDock 双翼托盘｜北弧 E350ez｜MacBook Pro 14 英寸为北弧 E350ez 快装支架设计，复用原厂金属 VESA 快装板（75×75 或 100×100 mm）。展开约 304×229 mm，裸夹距约 307–327 mm。【打印与下载】正式打印配置已通过 MakerWorld 验证：P2S PLA 三盘完整版 | 0.28mm. You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from MakerWorld

30 saves Source: MakerWorld Updated 2026-10-13 Print time: 20h 18m Filament: 628 g License: SDFL · non-commercial Category: Office

Tags: 北弧, e350ez, 笔记本支架, macbook pro, bambu p2s, pla laptop tray

About this model

DuoDock 双翼托盘｜北弧 E350ez｜MacBook Pro 14 英寸为北弧 E350ez 快装支架设计，复用原厂金属 VESA 快装板（75×75 或 100×100 mm）。展开约 304×229 mm，裸夹距约 307–327 mm。【打印与下载】正式打印配置已通过 MakerWorld 验证：P2S PLA 三盘完整版 | 0.28mm 加强结构。选择该配置后，可在 Bambu Studio 中打开，也可在 Bambu Handy 选择对应盘。原始文件提供同版 DuoDock_P2S_PLA_Compatible.3mf 和完整发布包（3MF、STL、装配 STEP、预览及安装说明）。【三盘五件】第 1 盘左托盘；第 2 盘右托盘；第 3 盘中央连接板及左右侧夹。所有公开文件均不含试配件。平台当前估算约 628 g PLA、20.3 小时，实际随耗材和切片设置变化。【打印设置】P2S、0.4 mm 标准喷嘴、普通 PLA、纹理 PEI；0.28 mm 层高、无支撑、4 mm brim。托盘 5 圈墙、20% Gyroid；中央板和侧夹 6 圈墙、45% Cubic、5 层顶底。保持原方向和比例。【配件清单】M5×16 内六角圆柱头螺丝 10 颗、普通 M5 六角螺母 10 颗、外径≤12 mm 的 M5 平垫 10 片；M4 螺丝 4 颗、普通 M4 六角螺母 4 颗、M4 平垫至少 4 片（按原厂金属板厚试螺丝长度，不得顶出）；2 mm 背胶硅胶/EVA 垫；15 mm 宽防脱带 1 条。【装配】1. 将 6 个 M5 螺母放入中央板底部六角槽，左右托盘置于连接板上方，用 6 颗带垫片 M5×16 均匀固定。2. 两只侧夹各用 2 颗 M5 螺丝和螺母固定，按电脑实测宽度调节，贴软垫但不要夹压机身。3. 将 4 个 M4 螺母放入中央板上方选定的 VES…

Frequently asked questions

Is this 3D model free to download?: Yes. DuoDock 双翼托盘｜北弧 E350ez 笔记本支架 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
Where is the STL hosted?: The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by user_1191931874.
Who made this model?: Designed by user_1191931874, published on MakerWorld. Please credit the creator when sharing your print online.
Can I print this at home?: Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.