Drip End Closer for 1/2 Irrigation Tubing
Source: MakerWorld by C59
The Drip End Closer for 1/2 Irrigation Tubing is a free printable 3D model from MakerWorld by C59. ½ in / 13 mm Drip Tubing CloserC59 GardenWorks | Yard care made easy, one print at a time.Close and secure drip tubing without cutting the line. You can download the STL file from the original listing below and print it at home.
About this model
½ in / 13 mm Drip Tubing CloserC59 GardenWorks | Yard care made easy, one print at a time.Close and secure drip tubing without cutting the line. This accessorie makes drip irrigation setup quick and easy.💡 Ideal for:½ in / 13 mm drip tubingNo-cut drip line managementDIY irrigation projects where flexibility mattersFits:½ in OD irrigation tubingUsage GuidelinesInsert the tubing through one side of the closer.Bend the tubing, leaving a reasonable amount of slack.Slide the bent section through the second opening.Done! Your drip line is securely closed without cutting.Print it. Slide it. Let it grow.CGW | Tools & accessories for the outdoor workspace.V1.0 Print SpecificationsMaterial: PETG for sun resistanceProfile: StrengthLayer Height: 0.20 mmMaterial used: PETGMode: CERTIFIED LUDICROUSInfil…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Drip End Closer for 1/2 Irrigation Tubing is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by C59.
- Who made this model?
- Designed by C59, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in half inch
