Cheap and quick RC car, easy to print
Source: Thingiverse by nullandvoid
The Cheap and quick RC car, easy to print is a free printable 3D model from Thingiverse by nullandvoid. This started out with a challenge. You can download the STL file from the original listing below and print it at home.
About this model
This started out with a challenge. Design and build a mostly 3d printed car then have a contest to see which is best. Our challenge rules were: cost: $40 not including electronics or filament. you'll notice that I mixed metric and inch parts, that's what I happen to be able to get locally. This is what I came up with. This car needs 230mm X travel to be printed. I'm including the solid files from 123d design so the chassis file can be modified to print on a 200mm print bed. Hardware needed: Radio system with mini metal gear servo for steering Motor/ESC, I used a 3650 motor combo that sells for $37 Battery: 2200mah 3 cell or smaller 5x225mm shaft for rear axle. 5x10x4 bearings Qty 4 (ID/OD/W) 48P spur gear, I used an Associated 31332 80t part. Take the right rear wheel into a hobby shop and…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Cheap and quick RC car, easy to print is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by nullandvoid.
- Who made this model?
- Designed by nullandvoid, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Cheap
