P&O Cruise Ship Ventura 1:1000 No Supports Needed
Source: MakerWorld by Ukdavewood
The P&O Cruise Ship Ventura 1:1000 No Supports Needed is a free printable 3D model from MakerWorld by Ukdavewood. Rework of the 1:500 multi colour, multi plate model I originally made to allow it to be printed in a single colour, at smaller scale and in one go, rather than as separate. You can download the STL file from the original listing below and print it at home.
About this model
Rework of the 1:500 multi colour, multi plate model I originally made to allow it to be printed in a single colour, at smaller scale and in one go, rather than as separate parts.Designed using Fusion 360 from ship deck plans, photographs and videos.See this video for background info on the design process. Timelapse of print hereBackground into the process involved in taking the 1:500 Multi colour model and making it printable at this scale Instructions:3mf file included will only load into Bambu Studio or Orca Slicer.Printed time on a Bambu Lab X1C around 7.5hrs at 0.2mm Layer Height, 0.4mm Nozzle, 15% Gyroid infill, Supports turned off.Model fits on a 256x256 plate if rotated to 45 degrees.All test prints also done with the full brim.Untested Prusa Slicer Prusa MK3s 0.20 Quality estimated…
Frequently asked questions
- Is this 3D model free to download?
- Yes. P&O Cruise Ship Ventura 1:1000 No Supports Needed is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Ukdavewood.
- Who made this model?
- Designed by Ukdavewood, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in P
More from Ukdavewood
