Christmas Tree
Source: MakerWorld by mobiobi
The Christmas Tree is a free printable 3D model from MakerWorld by mobiobi. The Base and Star will print without support, any settings.The tree will need minor supports in a couple areas, recommend 0.1-0.15mm layer height to keep the detail alive. You can download the STL file from the original listing below and print it at home.
About this model
The Base and Star will print without support, any settings.The tree will need minor supports in a couple areas, recommend 0.1-0.15mm layer height to keep the detail alive. Use 2x10mm long raw filament pieces as alignment pins to super-glue the tree halfs together. The larger tree can get away with 0.2mm layers without issue.The Globe Mesh may be a little trickier, recommend 0.2mm layers with support, max cooling air, SLOW speed, and 0.5-ish mm Z-hop. A wider extrude may help as well, 0.6mm, even with a 0.4mm nozzle. The idea being that the wider extrude will slump or droop, counteracting the tendancy for overhangs to curl up.If you're looking for the .step/.f3d files, let me know, I'll dig them out.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Christmas Tree is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by mobiobi.
- Who made this model?
- Designed by mobiobi, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in christmas
