Husky (HueForge)
Source: MakerWorld by SpannMagoo
The Husky (HueForge) is a free printable 3D model from MakerWorld by SpannMagoo. This Husky was created using Stable Diffusion. You can download the STL file from the original listing below and print it at home.
About this model
This Husky was created using Stable Diffusion. The dimensions are 150x150 Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ Sunlu Silver Transmission Distance: 2 PLA PolyTerra Cotton White Transmission Distance: 2.5 PLA PolyLite White Transmission Distance: 5Swap Instructions: Start with Charcoal Black At layer #11 (0.56mm) swap to Grey At layer #22 (1mm) swap to Silver At layer #33 (1.44mm) swap to Cotton White At layer #39 (1.68mm) swap to White for the rest.Edit: I'll upload the project file later today, so I can save AMS slots to it.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Husky (HueForge) is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by SpannMagoo.
- Who made this model?
- Designed by SpannMagoo, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in hueforge
