Bambu Lab nozzle clog minimisation
Source: MakerWorld by Rick269
The Bambu Lab nozzle clog minimisation is a free printable 3D model from MakerWorld by Rick269. EDIT: This will not fit on an X1(C), as the lidar sensor is directly behind the hotend fan.This is my attempt to help minimise nozzle clogging in my P1P, which seems to be a. You can download the STL file from the original listing below and print it at home.
About this model
EDIT: This will not fit on an X1(C), as the lidar sensor is directly behind the hotend fan.This is my attempt to help minimise nozzle clogging in my P1P, which seems to be a fairly common issue with Bambu Lab printers. One of the theories is that heat from the bed/model is being drawn up into the (relatively small) hotend cooling fan, which reduces its efficiency and ability to cool, especially when dealing with high bed temperatures. This simple cover should help with this.It is held on with the two screws which hold the hotend fan on. The easiest way to fit it is to unload the filament, remove the two screws which hold the hotend assembly in, and pull it down so you have enough room to unscrew the fan screws. Fit the "insulator" piece and then do up the fan screws. I printed in PETG-CF b…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Bambu Lab nozzle clog minimisation is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Rick269.
- Who made this model?
- Designed by Rick269, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in p1p
More from Rick269
