Bearing based spirographic WDT tool modified
Source: MakerWorld by Kampflafer
The Bearing based spirographic WDT tool modified is a free printable 3D model from MakerWorld by Kampflafer. BOM is the Same as the original, aside from the 8 magnets I used to hold the basket in place when rotating. You can download the STL file from the original listing below and print it at home.
About this model
BOM is the Same as the original, aside from the 8 magnets I used to hold the basket in place when rotating. (Fits my 18g ridgeless VST basket nicely)I used blind holes on my design to give the upper part a cleaner look.The use of a blind hole tap is advised to start ¾ of the thread length, otherwise the part may crack when screwing the M3 Screw in an undersized hole.BOM:16x Magnets 5x2.5mm (2 stacked on top in each hole) 1x M3x20mm SHCS5x M3x12 SHCS2x 61813 ZZ / 2Z (65x85x10 mm)10x MR63ZZ (3x6x2.5mm)10x Acupuncture needle
Frequently asked questions
- Is this 3D model free to download?
- Yes. Bearing based spirographic WDT tool modified is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Kampflafer.
- Who made this model?
- Designed by Kampflafer, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in moonraker
