Is this 3D model free to download?

Yes, 可叠加盒子和盖子但是我更愿意叫它篮子 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Where do I download the STL file?

The download is hosted by MakerWorld. Use the "Download from MakerWorld" link on this page to open the original listing and grab the file, or save it to your print queue in the free Thinger app.

Designed by 宇宙无敌超级球棒侠（国际站）, published on MakerWorld. Please credit the creator when sharing your print.

Can I print this at home?

Yes. This is a printable 3D model intended for home FDM and resin printers. Check the original listing for suggested print settings.

可叠加盒子和盖子但是我更愿意叫它篮子 3D printable model by 宇宙无敌超级球棒侠（国际站）

可叠加盒子和盖子但是我更愿意叫它篮子

Q: Is this 3D model free to download?

Yes, 可叠加盒子和盖子 但是我更愿意叫它篮子 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Source: MakerWorld by 宇宙无敌超级球棒侠（国际站）

The 可叠加盒子和盖子但是我更愿意叫它篮子 is a free printable 3D model from MakerWorld by 宇宙无敌超级球棒侠（国际站）. 我在原有的模型上放大了，可以完美的放置在拓竹上，但是可能会触碰到擦料件，如果你不介意的话，这个会是很好的收纳工具，其次我对模型的上盖进行的制作，以保证顶部可以放置其他的东西，由于整体的模型较大，我不建议你用半卷的耗材进行打印，因为我都是采用一些残次料已经一些垃圾料进行打印的 You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from MakerWorld

669 saves Source: MakerWorld Updated 2026-09-27 Print time: 1d 4h Filament: 686 g License: CC-BY-SA · commercial OK ★ 5.0 (1) 26 makes Category: Home & Organization

Tags: 收纳盒, 叠加

About this model

我在原有的模型上放大了，可以完美的放置在拓竹上，但是可能会触碰到擦料件，如果你不介意的话，这个会是很好的收纳工具，其次我对模型的上盖进行的制作，以保证顶部可以放置其他的东西，由于整体的模型较大，我不建议你用半卷的耗材进行打印，因为我都是采用一些残次料已经一些垃圾料进行打印的

Frequently asked questions

Is this 3D model free to download?: Yes. 可叠加盒子和盖子但是我更愿意叫它篮子 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
Where is the STL hosted?: The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by 宇宙无敌超级球棒侠（国际站）.
Who made this model?: Designed by 宇宙无敌超级球棒侠（国际站）, published on MakerWorld. Please credit the creator when sharing your print online.
Can I print this at home?: Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.

Similar 3D models in 收纳盒

Gear / Paid link The gear we print with Filament, tools, build plates and the hardware behind the models on Thinger, in one shoppable photo on our Amazon storefront. See the gear → Thinger earns a commission from qualifying purchases made through this link, at no extra cost to you.

可叠加盒子和盖子 但是我更愿意叫它篮子

About this model

Frequently asked questions

Similar 3D models in 收纳盒

可叠加盒子和盖子但是我更愿意叫它篮子