Bambu Lab P4 (Post-Print Processing Platform)
Source: MakerWorld by Alpha M
The Bambu Lab P4 (Post-Print Processing Platform) is a free printable 3D model from MakerWorld by Alpha M. After almost 2 months now of 3D printing I found the counter next to my printer became cluttered with dozens of old calibration lines and I was setting the plate on whatever I. You can download the STL file from the original listing below and print it at home.
About this model
After almost 2 months now of 3D printing I found the counter next to my printer became cluttered with dozens of old calibration lines and I was setting the plate on whatever I had there, old boxes or filament rolls, while I cleaned off the calibration lines. I was bending the plate on the edge of the counter, often getting the plate dirty in the process as I had to set it down to change grip to bend it in the other direction. I also found that putting the Bambu Lab scraper back in it's little holder was a two handed job and a bit awkward.I thought if I had a little platform that was airy underneath so it would cool faster while I cleaned off the calibration lines, along with a little garbage bin for the scrap and an integrated scraper holder that you could just sort of toss the scraper int…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Bambu Lab P4 (Post-Print Processing Platform) is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Alpha M.
- Who made this model?
- Designed by Alpha M, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in bambu
