Bambu X1/P1 side mount spool holder
Source: MakerWorld by Poli27
The Bambu X1/P1 side mount spool holder is a free printable 3D model from MakerWorld by Poli27. DescriptionPDFBambu P1P bearing side filament holder. You can download the STL file from the original listing below and print it at home.
About this model
DescriptionPDFBambu P1P bearing side filament holder. Made for Vision cover! It is good for every house, but it will be slightly raised due to the plexiglass frame of the vision!V2 !I changed the spool holder because it was not stable. I fixed the filament guide to the frame, it cannot be changed! On request, I will make one that has a connector! The factory reel holder is required!Please remove 2 screws to plexiglass, see attached picture!Requires :2pcs x 608ZZ bearings.or printed bearings : Optimal 608 Bearing (Print In Place) by J Lake 3D | Download free STL model | Printables.com3pcs 3x30mm screws2pcs M2.6x10Screws, M2.6x10 mm BHCS | Associated ElectricsPlease remove 2 screws to plexiglass, see attached picture!
Frequently asked questions
- Is this 3D model free to download?
- Yes. Bambu X1/P1 side mount spool holder is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Poli27.
- Who made this model?
- Designed by Poli27, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Bambu
More from Poli27
