Barrel Wine Dispenser
Source: Thingiverse by 512Designs
The Barrel Wine Dispenser is a free printable 3D model from Thingiverse by 512Designs. NOTE: wine bottle standard diameter is 18.5mm (+/-)0.5mm. You can download the STL file from the original listing below and print it at home.
About this model
NOTE: wine bottle standard diameter is 18.5mm (+/-)0.5mm. If your bottle in not in spec, a good seal will not be made. VIDEO: Pump Kit: 6mm x 4mm Stainless Capillary Tube: P14 O-ring: Harbor Freight or online (Optional; See EDIT 2) M3x12mm Bolts or similar sizes screws: pre-drill and tap for bolts Use brake line tubing bender to bend capillary tube 135º Use epoxy to glue locating pins and halves together. Use silicone around tubes going into the wine bottle Clean by running hot water through tube when finished EDIT: Added optional wine stopper model. This stopper can double as a bottle diameter test. Use it to make sure the Barrel Dispenser will fit. EDIT 2: Added a taper seal for printing with flexible filament. This taper seal will fit a wider tolerance of wine bottles than the O-Ring ca…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Barrel Wine Dispenser is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by 512Designs.
- Who made this model?
- Designed by 512Designs, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Barrel
