Overwatch Backlit Logo
Source: Thingiverse by MichaelTranster
The Overwatch Backlit Logo is a free printable 3D model from Thingiverse by MichaelTranster. Overwatch logo that is backlit by WS2812B Addressable LEDs and can be hung with a screw to the wall. You can download the STL file from the original listing below and print it at home.
About this model
Overwatch logo that is backlit by WS2812B Addressable LEDs and can be hung with a screw to the wall. Designed to be printed on the 300x300 bed of the CR10, idk if scalling it up for the S5 or anything larger that the regular CR-10 will allow the parts to snap together so try at your own risk! Parts snap together, no screws or glue to assemble the parts. Parts have .3mm gap to give a snug fit. I noticed that the actual logo includes a chamfer. So I included both the flat(the one in the picture) and the chamfered version(I haven't printed it yet. It shouldn't need supports for the lip but your printer may vary.). I soldered the LEDs with a sight arch to contour with the logo. For the upper Arch, I soldered 3 LEDs together and made a mirror set glued 2 of them back to back (that's hard to exp…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Overwatch Backlit Logo is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by MichaelTranster.
- Who made this model?
- Designed by MichaelTranster, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
