5pc Build Plate Rack - Bambu X1/P1
Source: MakerWorld by TDKInc
The 5pc Build Plate Rack - Bambu X1/P1 is a free printable 3D model from MakerWorld by TDKInc. Same setup as the 10pc plate holder, but in a compact 5 plate model! Link to the 10pc setup below. You can download the STL file from the original listing below and print it at home.
About this model
Same setup as the 10pc plate holder, but in a compact 5 plate model! Link to the 10pc setup below. The model picture is of the 10 plate version attached to the side of the X1. Simple rack to hold up to 5 build plates. Screws together with 3mmx14mm socket head cap screws. I included both 3mf and stl files with a multi color stand 3mf file. The 10 plate holder stands on it's own, but this 5 plate version will most likely need the stands if you wish to have it vertical, or opte to use 3m tape and attached it to the side of the X1 like I did. Although since the stand does bolt onto the rack, you can use it to mount to the underside of a bench or shelf in the vertical position. Other versions of this plate rack, Including H2C and H2D! 5 Plate H2C Version Plate H2C Version Plate H2D Version Pla…
Frequently asked questions
- Is this 3D model free to download?
- Yes. 5pc Build Plate Rack - Bambu X1/P1 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by TDKInc.
- Who made this model?
- Designed by TDKInc, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in build plate
/https://fbi.cults3d.com/uploaders/49103354/illustration-file/d4c21bfe-a9b5-4784-b432-389dc327c13e/42926.jpg)
