Filament rack
Source: MakerWorld by Asdfgasdfg
The Filament rack is a free printable 3D model from MakerWorld by Asdfgasdfg. Rack to store your filament spools.The cleats are fitted with 4mm countersunk screws, 2x per cleat, the cleats are 20mm thick. You can download the STL file from the original listing below and print it at home.
About this model
Rack to store your filament spools.The cleats are fitted with 4mm countersunk screws, 2x per cleat, the cleats are 20mm thick. In the image I attached the rack to a plasterboard so used countersunk m4x50mm bolts, secured in metal expansion plugs. 1 cleat per 1m, but depends on the rods and how sturdy your wall is.The racks are connected with 21mm wooden rod, was the easiest and cheapest for me to obtain, can easily be modified in the .f3d file if you got other rods. The rods can be fastened in the racks with 3x25mm countersunk wood screws.Printed the cleats in PA-CF and the racks with PETG, might be a bit overkill though. Depends on how you decide to set it all up! But probably want a lot of walls and a lot of infill.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Filament rack is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Asdfgasdfg.
- Who made this model?
- Designed by Asdfgasdfg, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in filament
More from Asdfgasdfg
