IKEA Kallax Spool holder
Source: MakerWorld by Snigzou
The IKEA Kallax Spool holder is a free printable 3D model from MakerWorld by Snigzou. Store your spools in your IKEA KALLAX using this simple holder.You can store up to two rows of 200 mm spools inside a single KALLAX cell. You can download the STL file from the original listing below and print it at home.
About this model
Store your spools in your IKEA KALLAX using this simple holder.You can store up to two rows of 200 mm spools inside a single KALLAX cell. Stores up to 5 spools per row, for a total of 10 per KALLAX cell. (depends on the width of your spools, 5 Bambu Lab spools fit inside one row, for a total of 10 per cell). Assembly instructionTake one "holder"_pos" and one “holder_neg” and assemble them using the peg and the hole. A dab of superglue will help.To fix onto your shelf, use double face tape (the thick kind). Apply one piece of tape in the middle and on the edges of the bottom of the assembled part. For one row, you need 2 "holder"_pos" and "holder"_neg". For a full kallax cell, you need 4 "holder"_pos" and "holder"_neg" Positioning the holdersTwo ways of doing it :Tape it inside your KALLAX…
Frequently asked questions
- Is this 3D model free to download?
- Yes. IKEA Kallax Spool holder is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Snigzou.
- Who made this model?
- Designed by Snigzou, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in spool holder
