Lithophane Holder 150mm
Source: MakerWorld by teedeebee
The Lithophane Holder 150mm is a free printable 3D model from MakerWorld by teedeebee. This is a complete re-design of a lithophane holder I saw earlier on Youtube or here on Thingiverse. You can download the STL file from the original listing below and print it at home.
About this model
This is a complete re-design of a lithophane holder I saw earlier on Youtube or here on Thingiverse. But this was for a small lithophane only and I needed a bigger one. Since nobody was able to share the design files with me so I could change the dimensions and add improvements, I decided to design my own. And here it is....Lithophane settings using LithoPhaneMaker.com (100% square image is essential!) Frame Option: FramedLithophane Resolution: 0.3Lithophane Height: 150Angle: 90Frame Width: 5Frame Height: 5Overhang Angle: 45Maximum Thickness: 3.6Minimum Thickness: 0.6Picture Spacing: 10Preferred PLA: eSun PLA+ Cool White. Printer settings for best results: Layer Height: 0.1mm, Speed: 45-60 mm/s, 6 walls, 99% infill (not 100%).Electronics needed: standard 12V stuff you can get from Banggood…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Lithophane Holder 150mm is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by teedeebee.
- Who made this model?
- Designed by teedeebee, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in lithophanebox
More from teedeebee
