X1C/P1P/P1S Nozzle Wiper
Source: MakerWorld by dekrug
The X1C/P1P/P1S Nozzle Wiper is a free printable 3D model from MakerWorld by dekrug. This has been the best mod on my X1C so far so just wanted to share. You can download the STL file from the original listing below and print it at home.
About this model
This has been the best mod on my X1C so far so just wanted to share. Bambu Lab X1C/P1P Nozzle Wiper with 2mm Silicone sheet. Print the design with higher temperature materials like PETG… ABS, ASARecommended to print the design laying on the side.Cut 14x17 mm rectangle from 2mm silicon sheet.Insert the silicon sheet into the groove.Use the original screw from the bambulab PTFE nozzle cleaner, to fix the clenar in the printer. And it's done. 2023.07.22: Added version IILowered the overall 3D printed part height to prevent any filament sticking on it.For this design, you need to use smaller 14x14x2 mm silicon sheet piece.You can use 4 edges of the silicone sheet while it wears out. I have the 2mm silicon sheet from aliexpress: for 200°C but it can handle higher temperatures check comment sec…
Frequently asked questions
- Is this 3D model free to download?
- Yes. X1C/P1P/P1S Nozzle Wiper is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by dekrug.
- Who made this model?
- Designed by dekrug, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in nozzle
