Is this 3D model free to download?

Yes, Simple Snowman Molds is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Where do I download the STL file?

The download is hosted by MakerWorld. Use the "Download from MakerWorld" link on this page to open the original listing and grab the file, or save it to your print queue in the free Thinger app.

Designed by Ondřej Kučera, published on MakerWorld. Please credit the creator when sharing your print.

Can I print this at home?

Yes. This is a printable 3D model intended for home FDM and resin printers. Check the original listing for suggested print settings.

Simple Snowman Molds 3D printable model by Ondřej Kučera

Simple Snowman Molds

Source: MakerWorld by Ondřej Kučera

The Simple Snowman Molds is a free printable 3D model from MakerWorld by Ondřej Kučera. Print twice for a complete mold. You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from MakerWorld

269 saves Source: MakerWorld Updated 2026-09-27 Print time: 46m Filament: 17 g License: CC-BY-NC-SA · non-commercial ★ 5.0 (9) 120 makes Category: Outdoor & Garden

Tags: toy, christmas, snowman, snow, winter, mold, christmasdecoration, winterdecoration, winterfun

About this model

Print twice for a complete mold. Larger nozzle sizes are strongly recommended for the bigger models. Best printed out of PETG, with 100% perimeters (instead of infill) and standing up straight with a large brim. Be mindful of the top of the head, due to the significant overhang.I have printed mine with a 0.8n @ 0.55l. For wet snow, fill both halves of the mold to the brim and press together. If you're working with powder snow, bury the molds in it and plow them through the snow towards each other several times, thoroughly compressing the snow inside the mold each time.You can try rotating either half around its vertical axis by a few degrees to help unstick the snow from the mold or to remove any snow stuck between the edges. Slightly squeeze either half to demold the snowman. If you're ha…

Frequently asked questions

Is this 3D model free to download?: Yes. Simple Snowman Molds is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
Where is the STL hosted?: The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Ondřej Kučera.
Who made this model?: Designed by Ondřej Kučera, published on MakerWorld. Please credit the creator when sharing your print online.
Can I print this at home?: Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.