Tevo Tarantula Dual Stepper Inverted Z
Source: Thingiverse by bitbrain
The Tevo Tarantula Dual Stepper Inverted Z is a free printable 3D model from Thingiverse by bitbrain. Made for the TEVO Tarantula but can be used with any T-Slot/V-Slot extrusions. You can download the STL file from the original listing below and print it at home.
About this model
Made for the TEVO Tarantula but can be used with any T-Slot/V-Slot extrusions. Platform height is 5mm and will work in conjunction with parts like these: I use this carriage ( For the original or other horizontal arrangements, see the remixes listed below. Designed for use with 48mm Nema 17 steppers. If you use a different size motor, you may want to adjust the posts on the base sections. The little holes on the top of the oldham couplers are to make applying lubrication easier. The Oldham middle sections require support, the rest can print as is. Sand the oldham sliding sections to 600 grit using water paper. Also, note the way the lead screw nuts are mounted in the rendering, this stops them from butting against the flexible couplers at the lowest point. Place 608zz bearings in the brack…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Tevo Tarantula Dual Stepper Inverted Z is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by bitbrain.
- Who made this model?
- Designed by bitbrain, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Tevo
