Volumetric Flow Test for RatRig V-CORE3
Source: MakerWorld by Yathani
The Volumetric Flow Test for RatRig V-CORE3 is a free printable 3D model from MakerWorld by Yathani. This file basically adds 100% speed every 5MM of height up to %1200 using M220 gcode command,Add sufficient brim to hold the model in place and set the external wall speed to. You can download the STL file from the original listing below and print it at home.
About this model
This file basically adds 100% speed every 5MM of height up to %1200 using M220 gcode command,Add sufficient brim to hold the model in place and set the external wall speed to something reasonable like 30mm/s. and print in vase mode The last 5mm will be (30x12= 360mm/s). This remix is for use with SuperSlicer
Frequently asked questions
- Is this 3D model free to download?
- Yes. Volumetric Flow Test for RatRig V-CORE3 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Yathani.
- Who made this model?
- Designed by Yathani, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in ratrig
