E3D Titan Aero Layer Fan Shroud for 50mm Radial + BL mount
Source: Thingiverse by FDM_Guru
The E3D Titan Aero Layer Fan Shroud for 50mm Radial + BL mount is a free printable 3D model from Thingiverse by FDM_Guru. Here is my WIP E3D Aero layer cooling solution. You can download the STL file from the original listing below and print it at home.
About this model
Here is my WIP E3D Aero layer cooling solution. This requires a 50mm radial fan, 2x m3x20 and 1x m3x35 bolt ( links below ). Note: For FT5 users, make sure you have clearance for homing on the right side. If not, add a spacer to contact the switch earlier. I may move it closer to the gear in future revs but that will only gain a couple mm at most. UPDATE ( 5/31/2017) Added BL Touch Mount UPDATE ( 5/4/2017): Added Volcano version ( 360, right mount). Its untested, feedback would be great. UPDATE ( 4/13/2017): 360 degree version! ( standard right & left mount and mirrored right mount for Trinus users) Added front nozzle version for front-to-back heater blocks. Added mirrored version for side nozzle. (NOTE! Mirrored is NOT a left hand version. Its for the literally mirrored Titan/Aero combo s…
Frequently asked questions
- Is this 3D model free to download?
- Yes. E3D Titan Aero Layer Fan Shroud for 50mm Radial + BL mount is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by FDM_Guru.
- Who made this model?
- Designed by FDM_Guru, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in E3D
More from FDM_Guru
