Katana Butterfly
Source: MakerWorld by ruimach
The Katana Butterfly is a free printable 3D model from MakerWorld by ruimach. SummaryOne more request from my kid, a smaller butterfly in the shape of a katana. You will need:4x Screws: 3mm in diameter and 10mm long4 nuts: 3mmVideo with a small. You can download the STL file from the original listing below and print it at home.
About this model
SummaryOne more request from my kid, a smaller butterfly in the shape of a katana. You will need:4x Screws: 3mm in diameter and 10mm long4 nuts: 3mmVideo with a small demonstration of the katana in action: initial layer may be challenging, so if needed, decrease the speed of the first layer. Assembly:The handles are different from each other. Both handle 1 A and B should be assembled together, and the same applies to handle 2 A and B.Handle 1, with the blade open, should be placed underneath, and handle 2 on top. Please refer to the image for orientation. Print Settings:Material: PLALayer Height: 0.2Infill: 15%Walls: 3Supports: NoBrim: NoRaft: NoSupports: NoChange filament during print: Yes, make your own color schemes :)Enjoy. If you have any questions or suggestions, hit me up in the co…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Katana Butterfly is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by ruimach.
- Who made this model?
- Designed by ruimach, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in balisong
