Eibos Cyclopes Filament Dryer Plugs
Source: MakerWorld by Shaladdin
The Eibos Cyclopes Filament Dryer Plugs is a free printable 3D model from MakerWorld by Shaladdin. I noticed that after drying my filaments in the Eibos Cyclopes multi-filament dryer, the humidity begins to creep back up as moisture sneaked in through the open exhaust and. You can download the STL file from the original listing below and print it at home.
About this model
I noticed that after drying my filaments in the Eibos Cyclopes multi-filament dryer, the humidity begins to creep back up as moisture sneaked in through the open exhaust and filament holes. To prevent that, I designed exhaust and filament feed plugs.What I call the “exhaust” is the center cutout pattern on the plexiglass coverWhat I call the “filament feed” are the 10 grommet lined holes on the face and top of the plexiglass cover.I printed this without any supports or brim on a Bambu Lab X1C with a 4mm nozzle and a layer height was 0.16mm. There's really no reason .2mm or greater layer height shouldn't work, but you may get “overhangs” on the chamfer if the layer height is too high.Recommend to print in PETG, ABS, or some other filament with a higher deformation temperature. That being sa…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Eibos Cyclopes Filament Dryer Plugs is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Shaladdin.
- Who made this model?
- Designed by Shaladdin, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in dryer
More from Shaladdin
