AMS PTFE GUIDE - Failed retraction error solution
Source: MakerWorld by maut3D
The AMS PTFE GUIDE - Failed retraction error solution is a free printable 3D model from MakerWorld by maut3D. Failed retraction error SOLUTION! Problem:Filament not able to enter the AMS BUFFER, due to being stuck on an edge in the PTFE coupler.The PTFE tube inside the PTFE coupler is at. You can download the STL file from the original listing below and print it at home.
About this model
Failed retraction error SOLUTION! Problem:Filament not able to enter the AMS BUFFER, due to being stuck on an edge in the PTFE coupler.The PTFE tube inside the PTFE coupler is at a very steep angle, this causes the filament to hit the edge and get stuck. Solution:PTFE tube guide. By installing the PTFE tube guide you change the entry angle of the PTFE tube to the coupler.This avoids the filament getting stuck on the AMS Buffer, and you won't get the error anymore. This print supports all PTFE tube outside diameters smaller than 6mm. (Stock Bambu Lab PTFE tube is 4mm outside diameter.) What you need:The printed file.Rectangle magnet that Bambu Lab shipped with the printer for the printed scraper. (there should be 2 included.)(Double sided tape can be used too!) How to install:-Print the f…
Frequently asked questions
- Is this 3D model free to download?
- Yes. AMS PTFE GUIDE - Failed retraction error solution is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by maut3D.
- Who made this model?
- Designed by maut3D, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in ams
More from maut3D
