Bambu AMS Hub Mount
Source: MakerWorld by Montminy
The Bambu AMS Hub Mount is a free printable 3D model from MakerWorld by Montminy. This is a minimal frame for mounting the AMS hub (not buffer) vertically so the single feed PTFE comes out the top and the 4 incoming PTFE feed from the bottom.This allows for. You can download the STL file from the original listing below and print it at home.
About this model
This is a minimal frame for mounting the AMS hub (not buffer) vertically so the single feed PTFE comes out the top and the 4 incoming PTFE feed from the bottom.This allows for AMS to be placed on either side of the printer while maintaining short PTFE runs.Note that this will interfere with many of the bucket designs as the cables partially cover the chute. I've purged over 1000 filament swaps with no filament backing up or getting hung up on the cables.A STEP file is included if you want to re-work it.Raising it up higher allows for more cable clearance, but a tighter bend on the top tube. This was a compromise.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Bambu AMS Hub Mount is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Montminy.
- Who made this model?
- Designed by Montminy, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in bambulab
![Humidity Sensor Mod for AMS Desiccant Box / Silica Gel Container [HYGROMETER] 3D model](https://makerworld.bblmw.com/makerworld/model/USf5fcda0d8b89e1/design/2023-10-18_88c78a885f1.png)
