XTouch Screen Mount
Source: MakerWorld by Aussie 3D Makers
The XTouch Screen Mount is a free printable 3D model from MakerWorld by Aussie 3D Makers. This is a mounting bracket for the XTouch (P1 Touch) The front mount is based on Dallasstarsfan V3 Mount so already has the required cutouts for SD Card and Temp Sensor wiring. You can download the STL file from the original listing below and print it at home.
About this model
This is a mounting bracket for the XTouch (P1 Touch) The front mount is based on Dallasstarsfan V3 Mount so already has the required cutouts for SD Card and Temp Sensor wiring. The X Touch gives P1 Series users a touch screen to give faster and better access to the many features of the P1 Series Printers. To learn more about the project, head to the GitHub GitHub - xperiments-in/xtouch This design incorporates a reset button into the design, so you may reset the screen without physically disconnecting it from the power. All it requires is 4x 3M 16 mm long screws. I have included the preferred print profile. If you choose to create your own, my recommendation is to have the button at 100% infill with a 10mm brim. The final picture on this file shows how the reset button should be orientate…
Frequently asked questions
- Is this 3D model free to download?
- Yes. XTouch Screen Mount is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Aussie 3D Makers.
- Who made this model?
- Designed by Aussie 3D Makers, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in xtouch
More from Aussie 3D Makers
