Adafruit RP2040 Macropad Case
Source: MakerWorld by Toasty
The Adafruit RP2040 Macropad Case is a free printable 3D model from MakerWorld by Toasty. Case for the Adafruit Macropad ( layer acts as keyplate-6 degree typing angle-Props up the oled so that it's more visible-Requires 4x30mm countersunk m3 machine screws and 4xm3. You can download the STL file from the original listing below and print it at home.
About this model
Case for the Adafruit Macropad ( layer acts as keyplate-6 degree typing angle-Props up the oled so that it's more visible-Requires 4x30mm countersunk m3 machine screws and 4xm3 nuts Updates:10/2023 - Added some supports beneath plate on lower case (yet to be tested on a new print to stop the plate from flexing as much, especially when the knob is pressed in as this caused issues)12/2021 - Changed plate and case tab thickness from 2mm to 1.5mm to match Cherry switch spec and cleaned up bottom case reinforcements to be flush with plate.1/2021 - Added access to reset switch and STEMMA QT Connector via bottom case.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Adafruit RP2040 Macropad Case is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Toasty.
- Who made this model?
- Designed by Toasty, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in adafruit
