The branching Fox
Source: MakerWorld by Thefrozenone92
The The branching Fox is a free printable 3D model from MakerWorld by Thefrozenone92. Here is my little branching Fox HueForge Print. Layerheight is at 0.08 mm with the standart 0,4mm Nozzle.The first Layer goes with 0,16mm in Total, 5 Colors where used. mine. You can download the STL file from the original listing below and print it at home.
About this model
Here is my little branching Fox HueForge Print. Layerheight is at 0.08 mm with the standart 0,4mm Nozzle.The first Layer goes with 0,16mm in Total, 5 Colors where used. mine where PLA PolyTerra Charcoal Black Transmission Distance: 0.3 PLA PolyLite Red Transmission Distance: 1.5 PLA PolyLite White Transmission Distance: 5 PLA PolyLite Orange Transmission Distance: 7.5 PLA PolyLite Yellow Transmission Distance: 11 PLA PolyLite White Transmission Distance: 5 Feel free, to use your very own colors and suprise us with your creativity. The Fillamentchanges whare as follows Start with Charcoal Black At layer #7 (0.64mm) swap to Red At layer #9 (0.8mm) swap to White At layer #10 (0.88mm) swap to Orange At layer #13 (1.12mm) swap to Yellow At layer #19 (1.6mm) swap to White for the rest.
Frequently asked questions
- Is this 3D model free to download?
- Yes. The branching Fox is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Thefrozenone92.
- Who made this model?
- Designed by Thefrozenone92, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in hueforge
