Polymaker Cardboard Spool Adapter For Bambu AMS V2
Source: MakerWorld by JesseZhang
The Polymaker Cardboard Spool Adapter For Bambu AMS V2 is a free printable 3D model from MakerWorld by JesseZhang. Used to mount Polymaker filaments onto Bambu's original spool,to avoid jams in AMS. You can download the STL file from the original listing below and print it at home.
About this model
Used to mount Polymaker filaments onto Bambu's original spool,to avoid jams in AMS. Other brands of cardboard spool should work but are untested.Installation is very simple. Please follow the process below:1 Open Bambu filament spool holder. 2 Rip the baffle off the side of the spool, taking care not to let the filament come loose. 3 Insert half of the Bambu original spool into the centre of the Polymaker's spool. 4 Carefully flip the combo over and tear off the other half of the barrier.5 Insert the adapter into the slit in the paper tube. Note that there are several notches that need to be aligned.6 Installing the other half of the spool. Then you are done. It is worth mentioning that if you happen to have original Bambu filament of the same material and colour, you can keep the original…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Polymaker Cardboard Spool Adapter For Bambu AMS V2 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by JesseZhang.
- Who made this model?
- Designed by JesseZhang, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in ams
