Is this 3D model free to download?

Yes, PTFE Y Tube Splitter - No PTFE fittings required is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Where do I download the STL file?

The download is hosted by MakerWorld. Use the "Download from MakerWorld" link on this page to open the original listing and grab the file, or save it to your print queue in the free Thinger app.

Designed by PCHuDSoN, published on MakerWorld. Please credit the creator when sharing your print.

Can I print this at home?

Yes. This is a printable 3D model intended for home FDM and resin printers. Check the original listing for suggested print settings.

PTFE Y Tube Splitter - No PTFE fittings required

Source: MakerWorld by PCHuDSoN

The PTFE Y Tube Splitter - No PTFE fittings required is a free printable 3D model from MakerWorld by PCHuDSoN. I was using this Y splitter as was very simple Bowden Y-Splitter for Bambu Lab X1 by ZzoyozZ | Download free STL model | Printables.com However, as it was free to move around. You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from MakerWorld

1,759 saves Source: MakerWorld Updated 2026-10-30 Print time: 58m Filament: 6 g License: CC-BY-NC-SA · non-commercial ★ 4.6 (130) 1,140 makes Category: 3D Printer

Tags: ptfe coupler, ptfe, splitter, ams, bambu, bowden, p1p

About this model

I was using this Y splitter as was very simple Bowden Y-Splitter for Bambu Lab X1 by ZzoyozZ | Download free STL model | Printables.com However, as it was free to move around, filament would catch and kind of ping within the tube system.I found a remix that put it in a box and I added holes to the box to pick up on the P1P PTFE coupler points as well as making it slimmer to be more in alignment with where the PTFE comes out of the printer.It is now solid in place and it is very smooth when the AMS is loading. Stand on to 2 opening end as per the original design.Printed in PETG to try and make the smoothest filament path as PETG seem slippery compared to PLA.0 infill required.Printed with 3 walls and 4 top an bottom layers but this could be overkill as it is very strong. isn't flat to the b…

Frequently asked questions

Is this 3D model free to download?: Yes. PTFE Y Tube Splitter - No PTFE fittings required is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
Where is the STL hosted?: The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by PCHuDSoN.
Who made this model?: Designed by PCHuDSoN, published on MakerWorld. Please credit the creator when sharing your print online.
Can I print this at home?: Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.