Portable USB lipo charger
Source: Thingiverse by GeorgeFPV
The Portable USB lipo charger is a free printable 3D model from Thingiverse by GeorgeFPV. Hi. You can download the STL file from the original listing below and print it at home.
About this model
Hi. This is my very first design. It's a case for this bangood usb lipo charger The installation is very simple. The pcb board is attached to the case with double side tape, One thing to consider is that you have to weld the xT60 connector, so that it sticks with the plate (see image). This way usb charger will enter the box without problems. To keep the connector in its final position I have stuck it to the bottom of the box and to the front of the box with Epoxy To close the box you will need 4 M3 screws of any length are needed, I used them 4mm Keep in mind that is my first deign, so i still have to learn a lot with 3d desgin. I have made it with Freecad. I have also updated the 3D design files if you want to modify them. I you print and have sucess let me now please ;)
Frequently asked questions
- Is this 3D model free to download?
- Yes. Portable USB lipo charger is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by GeorgeFPV.
- Who made this model?
- Designed by GeorgeFPV, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
