TPU Test Cube Prusa MK3S with Config for Ninjaflex
Source: MakerWorld by CherryHillTech
The TPU Test Cube Prusa MK3S with Config for Ninjaflex is a free printable 3D model from MakerWorld by CherryHillTech. SummaryThis is simple test cube of 20mm dimensions with a 10mm hole. You can download the STL file from the original listing below and print it at home.
About this model
SummaryThis is simple test cube of 20mm dimensions with a 10mm hole. The Fusion 360 file is included as well. I had a lot of trouble getting TPU to print and wanted to share how I did it. For adhesion issues on the MK3s I used blue tape on the PEI sheet per the recommendations on the Ninjatek site for Ninjaflex site - then loosened the bondtech screw till it didn't catch the nut and then screwed it in only a half turn or so as soon as it caught the nut, so it is basically as loose as possible. I read this was important to prevent the TPU from winding around the bond tech gears.For the temp for this filament from the link above it says 225-235 so I wanted to make sure it melted because in previous runs it was too gummy so used 247 on the first layer and 240 on the rest in my config.I change…
Frequently asked questions
- Is this 3D model free to download?
- Yes. TPU Test Cube Prusa MK3S with Config for Ninjaflex is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by CherryHillTech.
- Who made this model?
- Designed by CherryHillTech, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in cube
More from CherryHillTech
