AMS INSIDE PTFE GUIDE
Source: MakerWorld by papsjundi
The AMS INSIDE PTFE GUIDE is a free printable 3D model from MakerWorld by papsjundi. Made in response to Koen Burkink's post / founding of the possible cause for Slot 3 (and possibly 2) PTFE tube not a straight enough feed to the filament hub inside the AMS and. You can download the STL file from the original listing below and print it at home.
About this model
Made in response to Koen Burkink's post / founding of the possible cause for Slot 3 (and possibly 2) PTFE tube not a straight enough feed to the filament hub inside the AMS and causing failure in pulling the filament out. So he drilled a couple of holes and uses zip ties to secure the PTFE tubes. So I made a quick design in Fusion 360, a small guide with small opening to insert this guide on the tab… the pfte guide is angled a little towards the filament guide…You should install the PFTE tube first to the Hub, then slide it into the guide. When the whole thing is put back together, the PTFE shouldn't be able to slide out from the guide since it is pressed against the bottom of the AMS.Include the 3MF from BambuStudio and the Step file,Any issue please let me know
Frequently asked questions
- Is this 3D model free to download?
- Yes. AMS INSIDE PTFE GUIDE is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by papsjundi.
- Who made this model?
- Designed by papsjundi, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in bambu
More from papsjundi
