Poop/purge bucket for Bambu Lab A1 mini
Source: MakerWorld by mechanikendesigns
The Poop/purge bucket for Bambu Lab A1 mini is a free printable 3D model from MakerWorld by mechanikendesigns. A1 mini poop bucket with very tall side wall to catch every poop no matter what height the print head is at. You can download the STL file from the original listing below and print it at home.
About this model
A1 mini poop bucket with very tall side wall to catch every poop no matter what height the print head is at. I designed it not to take too much extra space to the left side of the desk. And with a magnet dock you can get a perfect alignment every time putting it back in place. Add a gantry alignment sign on the inner wall of the top piece for you to easily align the bucket when installing the dock or if you don't want to use the dock at all. BOM (Only need these if you want to use the magnet dock):63 or 123 magnets - 4pcs20mm wide at least 1mm thick double sided sticky tape - 1pcs Change log:10/20/2023: V1.1; Add 12x3 magnet version incase the 6x3 magnets are not strong enough for you; Decreased the depth of sticky tape cut out to 0.5mm.
Frequently asked questions
- Is this 3D model free to download?
- Yes. Poop/purge bucket for Bambu Lab A1 mini is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by mechanikendesigns.
- Who made this model?
- Designed by mechanikendesigns, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in poopbucket
