XINGTONGZHILIAN Spool (183 mm) Adapter for Bambu Lab AMS
Source: MakerWorld by clavo
The XINGTONGZHILIAN Spool (183 mm) Adapter for Bambu Lab AMS is a free printable 3D model from MakerWorld by clavo. Bought some filament of XINGTONGZHILIAN. You can download the STL file from the original listing below and print it at home.
About this model
Bought some filament of XINGTONGZHILIAN. The spools have a diameter of 18.3 cm and are wound up to the upper edge which causes an issue when the AMS rewinds the filament (filament jumps from the spool).Existing designs waste to much filament. So I have designed a filament-saving (very) tight-fit adapter that increases the diameter to 20 cm. Also added a lip on both inner sides so that it snaps into place. Notes:Printed with PLA (Overture PLA Matte). Settings: .2 mm layer hight, .4 nozzle, 4 walls, 15% gyroid infill. → less than 20g per adapter (40g per spool)To attach, place the adapter on one side and then press over the spool from both sides.And it should be obvious that you need two adapters per spool ;)Should also work with other spools that have a diameter of 18.3 cm
Frequently asked questions
- Is this 3D model free to download?
- Yes. XINGTONGZHILIAN Spool (183 mm) Adapter for Bambu Lab AMS is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by clavo.
- Who made this model?
- Designed by clavo, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in spool
