Is this 3D model free to download?

Yes, DIY Honeycomb Grid Godox AD200 / V1 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link to open the original listing by the creator.

Where do I download the STL file?

The download is hosted by MakerWorld. Use the "Download from MakerWorld" link on this page to open the original listing and grab the file, or save it to your print queue in the free Thinger app.

Designed by TechNerd, published on MakerWorld. Please credit the creator when sharing your print.

Can I print this at home?

Yes. This is a printable 3D model intended for home FDM and resin printers. Check the original listing for suggested print settings.

DIY Honeycomb Grid Godox AD200 / V1 3D printable model by TechNerd

DIY Honeycomb Grid Godox AD200 / V1 photo 1

DIY Honeycomb Grid Godox AD200 / V1 photo 2

DIY Honeycomb Grid Godox AD200 / V1 photo 3

DIY Honeycomb Grid Godox AD200 / V1 photo 4

DIY Honeycomb Grid Godox AD200 / V1

Source: MakerWorld by TechNerd

The DIY Honeycomb Grid Godox AD200 / V1 is a free printable 3D model from MakerWorld by TechNerd. I designed a 20° and 30° honeycomb grid compatible with the Godox AD200 + H200R / V1 flash and the AK-R1 kit - that actually works. You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from MakerWorld

116 saves Source: MakerWorld Updated 2026-09-27 Print time: 1h 33m Filament: 39 g License: CC-BY-NC · non-commercial ★ 5.0 (1) 42 makes Category: Gadgets & Electronics

Tags: flash, honeycomb, grid, photography, godox, spot, v1, modifier, wabe, ad200, h200r, ad200pro, snoot

About this model

I designed a 20° and 30° honeycomb grid compatible with the Godox AD200 + H200R / V1 flash and the AK-R1 kit - that actually works. The included grid in the AK-R1 kit is not very effective in creating a small soft spot light. I used a cylindrical modifier therefore the honeycomb pattern is only visible after you hit slice in Bambu Studio. I use the infill instead of modeling the honeycomb because it prints much faster this way.Modifier with 0 bottom and top layers and infill is already set-up just open the file, select your filament and hit slice and print.I use the honeycomb infill pattern because it creates a round spot light but takes a little bit longer to print for the 30°. If you change the infill pattern to “Grid” change also the density to 25% check the screenshot above. Grid infi…

Frequently asked questions

Is this 3D model free to download?: Yes. DIY Honeycomb Grid Godox AD200 / V1 is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
Where is the STL hosted?: The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by TechNerd.
Who made this model?: Designed by TechNerd, published on MakerWorld. Please credit the creator when sharing your print online.
Can I print this at home?: Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.