Malkus Sunlu S2 filament dryer mounting X1C
Source: MakerWorld by Malkus
The Malkus Sunlu S2 filament dryer mounting X1C is a free printable 3D model from MakerWorld by Malkus. This is a mounting bracket for the Sunlu S2 filament dryer. You can download the STL file from the original listing below and print it at home.
About this model
This is a mounting bracket for the Sunlu S2 filament dryer. It is compatible with use of a poop bucket on the back side. Its stable with its support legs and has good clearance for the power cable. The dryer can be secured to the bracket by replacing two externally mounted screws of the dryer and mounting new longer ones through the holding tray. The legs are printed seperatly and slided into place. 1, Print and remove supports. Take extra care scraping and clearing the tracks for the legs interface. Support in the screw holes can be punched out from the sop side afterwards 2, Remove the two visible screws from the bottom of the dryer 3, Fasten the dryer through the tray screw holes from below with 2 pcs #6 x 3/4” metal screws or 4x25mm ones. 4, Tap the legs in place with some mechanical e…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Malkus Sunlu S2 filament dryer mounting X1C is free to download from MakerWorld. Open it in the free Thinger app, or use the "Download from MakerWorld" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by MakerWorld, not by Thinger. We link you directly to the original listing by Malkus.
- Who made this model?
- Designed by Malkus, published on MakerWorld. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in sunlu
More from Malkus
