CR-10 "Batfang" - Dual 50mm Fan Mod
Source: Thingiverse by The3DWorkshop
The CR-10 "Batfang" - Dual 50mm Fan Mod is a free printable 3D model from Thingiverse by The3DWorkshop. This is a dual 50mm Fan mod for the Creality CR10 nicknamed the "Batfang." It uses the stock hotend shroud, and press fits into place. You can download the STL file from the original listing below and print it at home.
About this model
This is a dual 50mm Fan mod for the Creality CR10 nicknamed the "Batfang." It uses the stock hotend shroud, and press fits into place. It fits very snug at the current settings and does not move. This fang has 3 parts, the body and two covers to reduce the support necessary for printing. It uses the 4 original screws from the stock part cooler to hold these covers on. Please note that this upgrade is not recommended if you are going to be printing sequenced prints "one after another", as it adds significant mass to the print head, and will likely collide with parts on the hot bed if you do not print multiple prints "all at once." If however you print single parts, or multiples "all at once" there should be no issues. As of right now this is a working prototype. I have tested this part in a…
Frequently asked questions
- Is this 3D model free to download?
- Yes. CR-10 "Batfang" - Dual 50mm Fan Mod is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by The3DWorkshop.
- Who made this model?
- Designed by The3DWorkshop, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in CR-10
