Tevo Tarantula Z Axis Stabilization Bracket
Source: Thingiverse by Tinic
The Tevo Tarantula Z Axis Stabilization Bracket is a free printable 3D model from Thingiverse by Tinic. This is a stabilization bracket for the Tevo Tarantula printer. You can download the STL file from the original listing below and print it at home.
About this model
This is a stabilization bracket for the Tevo Tarantula printer. In the stock printer the Z-Axis 'floats' on the flexible shaft coupling which creates some vibrations and compromises rigidity. To install this you need 1) a standard 8x22x7 bearing and 2) some sort of 8mm shaft collar and 3) 2 x 4mm T-nuts and M4 bolts, which you should already have. The bearing and collar are available for cheap on Amazon. I made my shaft collar on my lathe but you can as well print your own using pretty much any material, see Sample Amazon listings: I did print this bracket with 100% infill for maximum rigidity. I recommend to place a 8mm washer (or something close to that) between bearing and collar so that the collar does not rub on the shielding of the bearing. In my case the shielding of the bearing was…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Tevo Tarantula Z Axis Stabilization Bracket is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by Tinic.
- Who made this model?
- Designed by Tinic, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Tevo
