Fully Printed Squirting Detergent Cap
Source: Thingiverse by Department_Nine
The Fully Printed Squirting Detergent Cap is a free printable 3D model from Thingiverse by Department_Nine. Wanted to see if it was possible to create a fully printed version of the Dispensing Valve Lid for Plastic Bottles. You can download the STL file from the original listing below and print it at home.
About this model
Wanted to see if it was possible to create a fully printed version of the Dispensing Valve Lid for Plastic Bottles. This squirts perfectly well, it just lacks the suck-back function of a commercially made silicone valve. - Fits on threaded 28mm plastic bottles. - Print the lid from something that survives hot water, e.g., PETG, ABS or ASA. - Print the valve from TPU (90A or 95A) with 0.20mm layers - this is both as the dispensing valve and seals the lid and the bottle. - To slit the valve: - Insert the valve into the lid with the membrane facing inwards towards thread. - Screw the cutting guide in place, - Using the slots as guides, cut the membrane with a scalpel blade - three smooth single cuts. - Remove the cutting guide and carefully extract the valve. - Check the cuts. - Re-insert the…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Fully Printed Squirting Detergent Cap is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by Department_Nine.
- Who made this model?
- Designed by Department_Nine, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in department 9
More from Department_Nine
