RC Shock Synchronizer / Suspension Link Matching Tool
Source: Thingiverse by ItsJustJoe
The RC Shock Synchronizer / Suspension Link Matching Tool is a free printable 3D model from Thingiverse by ItsJustJoe. A tool used for synchronizing shocks and matching suspension link lengths. You can download the STL file from the original listing below and print it at home.
About this model
A tool used for synchronizing shocks and matching suspension link lengths. Two versions of the base and scale are available, one with measurements and one without. The versions with measurements take much longer to print. Both versions use all of the same hardware and print settings. To assemble use one or two retaining washers to secure the slider to the base from the back using an m3x10mm buttonhead. Use an m3x16mm buttonhead to attach the scale to the base with an m3 washer in between as a spacer. Screw the m3x16 directly into the base loose enough that the scale pivots easily and use an m3 nut from the back side of the base to lock the screw into place. Use four m3x20mm buttonheads, two through the backside of the scale and two through the back of the slider. These will be the posts yo…
Frequently asked questions
- Is this 3D model free to download?
- Yes. RC Shock Synchronizer / Suspension Link Matching Tool is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by ItsJustJoe.
- Who made this model?
- Designed by ItsJustJoe, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Link Matching Tool
