Drill Abrasive Drum
Source: Thingiverse by Dagongar
The Drill Abrasive Drum is a free printable 3D model from Thingiverse by Dagongar. Drum to assemble strips of sandpaper. You can download the STL file from the original listing below and print it at home.
About this model
Drum to assemble strips of sandpaper. I have made two designs: - 60 mm long x 50 mm in diameter, to use strips of 205x60 sandpaper. You can use standard roll paper 120 mm wide by cutting it in half. - 56 mm long x 66.8 mm in diameter, to be used with sheets of standard size paper (280x230), cut into 5 strips of 56x230 (see figure 6). They are tested up to 3000 rpm, which is the maximum of my drill, no problems. Necessary material (Image 1): - Printed drum and jaw. - M8 screw, hexagonal head, 100 mm of length. - M8 nut. - Lock washer for M8 to prevent loosening of the nut. - 1.5 mm diameter wire Drum mounting: - Insert the jaw into the corresponding hole in the drum, aligning the hole of the jaw with that of the drum. - Insert the screw so that the head is fitted into the hexagon. - Bend th…
Frequently asked questions
- Is this 3D model free to download?
- Yes. Drill Abrasive Drum is free to download from Thingiverse. Click the "Download free STL" button above to open the original listing.
- Where is the STL hosted?
- The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by Dagongar.
- Who made this model?
- Designed by Dagongar, published on Thingiverse. Please credit the creator when sharing your print online.
- Can I print this at home?
- Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.
Similar 3D models in Drill
![Mini Drill Press for PCB Drill [remixed] [+Speed Control] 3D model](https://cdn.thingiverse.com/renders/03/0f/c3/b0/e1/IMG_0109_preview_card.JPG)
