Is this 3D model free to download?

Yes, Slim wall-mounted frame/housing for the SEEED TRMNL 7.5" DIY kit or EN04 with 7.5" ePaper is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link to open the original listing by the creator.

Where do I download the STL file?

The download is hosted by Thingiverse. Use the "Download from Thingiverse" link on this page to open the original listing and grab the file, or save it to your print queue in the free Thinger app.

Designed by boklubre, published on Thingiverse. Please credit the creator when sharing your print.

Can I print this at home?

Yes. This is a printable 3D model intended for home FDM and resin printers. Check the original listing for suggested print settings.

Slim wall-mounted frame/housing for the SEEED TRMNL 7.5" DIY kit or EN04 with 7.5" ePaper 3D printable model by boklubre

Slim wall-mounted frame/housing for the SEEED TRMNL 7.5" DIY kit or EN04 with 7.5" ePaper photo 1

Slim wall-mounted frame/housing for the SEEED TRMNL 7.5" DIY kit or EN04 with 7.5" ePaper photo 2

Slim wall-mounted frame/housing for the SEEED TRMNL 7.5" DIY kit or EN04 with 7.5" ePaper photo 3

Slim wall-mounted frame/housing for the SEEED TRMNL 7.5" DIY kit or EN04 with 7.5" ePaper photo 4

Slim wall-mounted frame/housing for the SEEED TRMNL 7.5" DIY kit or EN04 with 7.5" ePaper

Source: Thingiverse by boklubre

The Slim wall-mounted frame/housing for the SEEED TRMNL 7.5" DIY kit or EN04 with 7.5" ePaper is a free printable 3D model from Thingiverse by boklubre. The wall-mounted enclosure was originally designed for the TRMNL 7.5" (OG) DIY kit. You can download the STL file from the original listing below and print it at home.

Open in Thinger (free) Download from Thingiverse

30 saves Source: Thingiverse Updated 2026-11-08 License: CC-BY-NC · non-commercial Category: 3D Printer

Tags: 75, EE04, en04, frame, housing, seeed, slim, TRMNL

About this model

The wall-mounted enclosure was originally designed for the TRMNL 7.5" (OG) DIY kit. However, as I’m working with OpenDisplay, the ESP32-S3 (XIAO EE04 board) is only partially suitable for battery operation. Fortunately, the XIAO EN04 board has the same dimensions and can be used with this case without any problems. To screw the board in place, I used self-tapping screws measuring 2.2 x 6.5 mm. If you switch from the XIAO EE04 board (ESP32-S3) supplied with the TRMNL 7.5" DIY kit to the much more efficient XIAO EN04 board (nRF52840), you will unfortunately also need to either adapt or replace the battery. The XIAO EE04 board has a 3-pin battery connector, whilst the XIAO EN04 board has a 2-pin connector. However, both connectors are JST PH2.0 plugs! The battery should be no more than 8–9 mm…

Frequently asked questions

Is this 3D model free to download?: Yes. Slim wall-mounted frame/housing for the SEEED TRMNL 7.5" DIY kit or EN04 with 7.5" ePaper is free to download from Thingiverse. Open it in the free Thinger app, or use the "Download from Thingiverse" link above to open the original listing.
Where is the STL hosted?: The download is hosted by Thingiverse, not by Thinger. We link you directly to the original listing by boklubre.
Who made this model?: Designed by boklubre, published on Thingiverse. Please credit the creator when sharing your print online.
Can I print this at home?: Yes. This model is intended for home FDM and resin 3D printers. Check the original listing for suggested print settings like layer height and supports.